TZ-600-SSA Trapzilla Grease Interceptor
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TZ-600-SSA Above-Ground Trapzilla Grease Interceptor is ASME rated for 75 GPM (4.73 l/s)and holds 635 pounds (86 Gallons) of grease in a 95 Gallon footprint. This means that unlike traditional interceptor designs, the TZ-600-SSA is capable of holding more than 91% of its internal volume in grease and solids before it begins to lose efficiency. Perfect for replacing failing steel or concrete, the TZ-600-SSA is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The Above-Ground models come with a SSOP-400/600 Support Stand, a Standard Adapter Ring lid and 22" Solid Top Cover that can be removed easily to clean out retained grease.
ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 l/s)
Grease Retention Capacity: 635 Pounds (288 Kg)
Material: Rotationally Molded Polyethylene
Product Weight: 104 Pounds (48 Kg)
Thermaco Trapzilla Model No. TZ-600-SSA, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) / 635.6 lbs. (288.3 Kg) of total grease storage capacity with flat separation efficiency curve capable of holding 91% of volume in free-floating fats, oils, and grease at capacity, with removable cover for grease and solids removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and heavier than water solids, a unitary tank body and 4” (101 mm) inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Included support stand manufactured out of linear low-density rotationally molded polyethylene.
Unit may also be listed as TZ600 or TZ600SSA
|Trapzilla Brochure||Trapzilla Brochure||1.8 MB||Download|
|TZ-600-SSA Specification Sheet||TZ-600-SSA Specification Sheet||359.8 KB||Download|
|Trapzilla 2-Page Flyer||Trapzilla 2-Page Flyer||1.1 MB||Download|
|TZ-160, TZ-400, TZ-600 Manual||5.6 MB||Download|
Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.
If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.