TZ-1826-ECA Trapzilla Grease Interceptor

In stock
SKU
TZ-1826-ECA

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The TZ-1826-ECA In-Ground Trapzilla Grease Interceptor is ASME/PDI rated for 100 GPM and holds more than 1,826 pounds (248 Gallons) of grease in a 274-Gallon footprint.  Unlike traditional interceptor designs, the TZ-1826-ECA is capable of holding more than 90% of its internal volume in grease and solids before it begins to lose efficiency.  Perfect for replacing failing steel or concrete, the TZ-1826-ECA is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials.  The in-ground model comes with an 18" long single-piece extension collar and 22" Solid Top Cover that can be removed easily to clean out retained grease.

Previously listed as TZ-1826

99% Efficiency - Miami-Dade DERM Approved

The TZ-1826 ASME test report can be found under the Product Attachment tab below the product image.

$5,935.00

ASME A112.14.3/PDI-G 101 Flow Rate: 100 GPM (6.31 l/s)

Grease Retention Capacity: 1,826 Pounds (828 Kg) / 248 Gallons (1,037 L)

Material: Rotationally Molded Polyethylene

Thermaco Trapzilla Model No. TZ-1826-ECA, linear low-density rotationally molded polyethylene grease and oil separator(s) for below or above-ground installation, shall be PDI-G 101 and ASME A112.14.3-rated at 100 GPM (6.31 l/s), 1826 pounds (828 Kg) of grease storage capacity with a flat grease separation efficiency curve, crush-resistant cylindrical walls, two fully removable covers for grease and solids removal, integral non- floatation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and solids, and including as an integral part of the unit an integral gas trap and a fully removable polyethylene self-positioning keyed cover equipped with sealed thread fasteners. Includes dual-entry extension collar assembly, linear low-density rotationally molded polyethylene for field adjust- ability to optimal installation depth. 

Previously listed as TZ-1826

Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.

If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.

Your browser does not support WebGL, please use a Modern Browser