TZ-400 Trapzilla Grease Interceptor
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TZ-400 Trapzilla Grease Interceptor is rated for 75 GPM (4.73 l/s), and holds 405 pounds (54 Gallons) of grease in only a 70 Gallon footprint. Perfect for replacing failing steel or concrete, the TZ-400 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The basic models come with a Standard Adapter Ring lid and 22" Solid Top Cover that can be removed easily to clean out retained grease.
Maximum Inlet Flow Rate: 75 GPM (4.73 l/s)
Grease Retention Capacity: 405 Pounds (183 Kg)
Material: Rotationally Molded Polyethylene
Product Weight: 71 Pounds (33 Kg)
Thermaco Trapzilla Model No. TZ-400, linear low-density rotationally molded polyethylene grease and oil separator(s) for below or above-ground installation, shall be ASME A112.14.3 Rated at 75 gallons (4.73 l/s) per minute peak flow, 405 pounds (183 Kg) of grease storage capacity with a flat grease separation efficiency curve, crush-resistant cylindrical walls, fully removable cover for grease and solids removal, integral non- floatation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, separate storage compartments for grease and solids, and including as an integral part of the unit an integral gas trap and a fully removable polyethylene self-positioning keyed cover equipped with sealed thread fasteners.
Unit may also be listed as TZ400
|TZ-400 Specification Sheet||TZ-400 Specification Sheet||347.9 KB||Download|
|TZ-400 Traffic Rated Installation Drawings||TZ-400 Traffic Rated Installation Drawings||260.1 KB||Download|
|Trapzilla 2-Page Flyer||Trapzilla 2-Page Flyer||1.1 MB||Download|
|Trapzilla Brochure 2022||Details on the Full Line||11.5 MB||Download|
|Trapzilla Installation & Operation Manual||4.7 MB||Download|
Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.
If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.