TZOWS-100 Trapzilla Oil Water Separator

SKU
TZOWS-100

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The TZOWS-100-SSA Above-Ground Trapzilla Oil/Water Separator is rated for 100 GPM (6.31 l/s) and holds 248 Gallons (941 liters) of oil in a 274-Gallon footprint.  Unlike traditional oil/water separator designs, the TZOWS-100-SSA is capable of holding more than 90% of its internal volume in oil before it begins to lose efficiency.  It is manufactured out of durable polyethylene, meaning that it will outlast traditional separators made of inferior materials.  The in-ground model comes with two 18" long single-piece extension collars and two 22" Solid Top Covers that can be removed easily to clean out retained oil.

$5,935.00

Flow Rating: 100 gpm (6.31 l/s)*

Liquid Capacity: 274 gallons (1,037 L)

Oil Retention Capacity: 248.77 Gallons (941 L)

Sand/Grit Capacity: 74 gallons (280 L)

Inlet/Outlet: 4” (101 mm)**

Construction: Single-Piece Rotationally Molded Polyethylene Exterior Tank with Inlet/Outlet Inverts secured using Patented Interior Radial Compression Ring

*  Additional Flow Ratings based on mg/L effluent testing available upon request
** 6" (152mm) Inlet/Outlet available as TZOWS-100-SSA-6 

Thermaco Trapzilla Model No. TZOWS-100, rotationally molded polyethylene oil separator(s) for above ground installation, shall be rated at 100 GPM (6.31 l/s) with 248.77 Gallons (941 L) of total oil storage capacity with flat oil separation efficiency curve capable of holding 90% of volume in free-floating oils at capacity, with removable cover for oil and sand/grit removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for oil and heavier than water solids, a unitary tank body and inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Includes dual-entry extension collar assembly, linear low-density rotationally molded polyethylene for field adjustability to optimal installation depth.

Icon Label Description Type Size Download
Installation and Operations Manual for TZOWS-100 Installation and Operations Manual for TZOWS-100 pdf 3.5 MB Download
Trapzilla TZOWS-100-6 Specification Sheet with 6inch Inlet-Outlet Trapzilla TZOWS-100-6 Specification Sheet with 6inch Inlet-Outlet pdf 498.1 KB Download
Trapzilla TZOWS-100 Specification Sheet Trapzilla TZOWS-100 Specification Sheet pdf 499.2 KB Download
Brochure Insert for TZOWS-100 Brochure Insert for TZOWS-100 pdf 1.2 MB Download

Choose the CAD format first and then click 'Download CAD' to get drawing.

If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.

Your browser does not support WebGL, please use a Modern Browser