W-1250-AST Automatic Grease Removal Device
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
- Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with two center lid assemblies with digital control interface and Grease Collector.
- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 50/60 Hz, 1055 Watts (9.1 Amps)*
Maximum Inlet Flow Rate: 125 GPM (7.89 l/s)
Number of Skimming Wheels: 1
Skimming Rate: 40 Pounds Per Hour (18.16 Kg Per Hour)
Grease Retention Capacity: 300+ Pounds (136+ Kg)
Eductor Pump Operation Water Requirements: 50 PSI min., 12 GPM (3.45 BAR min., 0.75 l/s)
Thermaco Big Dipper Model No. W-1250-AST, bright finish type 304 stainless steel exte- rior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 125 gallons per minute (7.89 l/s) peak flow, 300 pounds (136 Kg) of grease capacity and including as an integral part of the unit, two rotating gear hydrophobic wheel assemblies for automatic grease/ oil removal, an integral flow control device, two self-regulating enclosed electric immersion heaters, a vessel vent, an integral gas trap, two integral programmable 24-hour multi-event time controls, field reversible motor locations, field reversible grease/oil sump outlets, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, lift-out filter basket access, an eductor transfer pump controlled by repeat cycle timer, and two separate grease and oils collection containers. Eductor pump shall be supplied with a 0.5” female connector for attachment to facility-supplied water supply. Eductor pump shall be supplied with an approved vacuum breaker. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Each electric motor equipped with overload protection.
W-1250-AST: 115V 50/60Hz, 1055 Watts (9.1 Amps)
W-1250-AST-E: 230V 50/60Hz, 1055 Watts (4.6 Amps)
Unit may be improperly listed as W1250AST, W-1250AST, W1250-AST, W-1250, W1250, 1250-AST or 1250AST