W-200-IS Automatic Grease Removal Device
Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 520 Watts (4.5 Amps)*
Maximum Inlet Flow Rate: 20 GPM (1.26 l/s)
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour (9.08 Kg Per Hour)
Grease Retention Capacity: 40+ Pounds (18.14 Kg)
Internal Solids Strainer Capacity: 1.85 Gallons (7 L)
Thermaco Big Dipper Model No. W-200-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 20 gallons per minute (1.26 l/s) peak flow, 40 pounds (18.14 Kg) of grease capacity and includ- ing as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection. Two (2) no-hub connectors for plumbing connection provided.
W-200-IS: 115V 50/60Hz, 520 Watts (4.5 Amps)
W-200-IS-E: 230V 50/60Hz, 520 Watts (2.3 Amps)
Unit may be improperly listed as W200IS, W-200IS, W200-IS, W-200, W200, 200-IS or 200IS
Choose the CAD format first and then click 'Download CAD' to get drawing.