TZ-600-SSA-6 Trapzilla Grease Interceptor with 6" Inlet/Outlet

SKU
TZ-600-SSA-6

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The TZ-600-SSA-6 Above-Ground Trapzilla Grease Interceptor with 6" Inlet/Outlet is ASME rated for 75 GPM (4.73 l/s) and holds 635 pounds (86 Gallons) of grease in a 95 Gallon footprint. This means that unlike traditional interceptor designs, the TZ-600-SSA-6 is capable of holding more than 91% of its internal volume in grease and solids before it begins to lose efficiency. Perfect for replacing failing steel or concrete, the TZ-600-SSA-6 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The Above-Ground models come with a SSOP-400/600 Support Stand, a Standard Adapter Ring lid and 22" Solid Top Cover that can be removed easily to clean out retained grease.

$3,513.00

ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 l/s)

Grease Retention Capacity: 635 Pounds (288 Kg)

Material: Rotationally Molded Polyethylene

Product Weight: 104 Pounds (48 Kg)

Thermaco Trapzilla Model No. TZ-600-SSA-6 with 6" Inlet/Outlet, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) / 635.6 lbs. (288.3 Kg) of total grease storage capacity with flat separation efficiency curve capable of holding 91% of volume in free-floating fats, oils, and grease at capacity, with removable cover for grease and solids removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and heavier than water solids, a unitary tank body and 6” (152 mm) inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Included support stand manufactured out of linear low-density rotationally molded polyethylene. 

 

Icon Label Description Type Size Download
TZ-600-SSA-6 Specification Sheet TZ-600-SSA-6 Specification Sheet pdf 368.6 KB Download
Trapzilla 2-Page Flyer Trapzilla 2-Page Flyer pdf 1.1 MB Download
Trapzilla Brochure 2022 Details on the Full Line pdf 11.5 MB Download
Pumping Instructions For Trapzilla TZ-160, TZ-400 and TZ-600 Models pdf 921.1 KB Download
Trapzilla Installation & Operation Manual pdf 4.7 MB Download