Trying to figure out how to fit a grease trap into your kitchen? Download our free guide on saving space in kitchen design.

X

Trapzilla Options

Units purchased online qualify for free shipping*.

See specific product to be purchased for shipping method to be used.  Following purchase of unit to be shipped via LTL, contact Thermaco at 1-800-633-4204 to verify shipping details and schedule delivery.

*Online ordering and free shipping only available in contiguous or lower 48 states in US.  All other locations should contact local representation or Thermaco for additional assistance in purchasing items.

  1. ECA-TZ-29 Two-Piece Extension Collar - Fully Extended

    ECA-TZ-29
    Part #: ECA-TZ-29

    $627.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    The Trapzilla ECA-TZ-29 Two-Piece Extension Collar with telescoping design and ladder grooves, allows for precise sizing in the field, offering an additional 29" (73.7 cm) of extension for Trapzilla Units installed in-ground.  ECA-TZ-29 is compatible with 18" Single-Piece Extension Collar found on In-Ground (-ECA) Models and Standard Adapter Ring found on Basic Models.  Installed with In-Ground (-ECA) Models, Trapzilla Unit has up to 47" of extension to bring lid to ground level.

    Learn More
  2. SSOP-70/95 Support Stand for use with TSS-70 & TSS-95 models

    SSOP-70/95 Support Stand
    Part #: SSOP-70/95

    $590.00

    QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. 

    Used to support the Trapzilla Solids Separator unit when installed directly on the floor of a basement or a mechanical room.

    Learn More
  3. SSOP-400/600 Support Stand for use with TZ-400 & TZ-600 models

    SSOP-400/600 Support Stand
    Part #: SSOP-400/600

    $590.00

    QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. 

    Used to support the Trapzilla unit when installed directly on the floor of a basement or a mechanical room.

    Learn More
  4. Vented Flow Control Assembly, 100 gpm

    Vented Flow Control Assembly, 100 gpm
    Part #: VFCA-100

    $83.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor.  The VFCA-100 Vented Flow Control module provides an option for use with installations where significant head pressure is present (greater than 6' [1.95 m]) or where applicable regulations require vented flow controls.  The Vented Flow Control helps reduce problems associated with high head pressure and helps slow the drainwater flow down the pipe, preventing it from exceeding 100 gallons per minute (6.31 l/s).  Includes appropriate PVC fitting and flow stainless steel flow control orifice.

    Learn More
  5. Vented Flow Control Assembly, 75 gpm

    Vented Flow Control Assembly, 75 gpm
    Part #: VFCA-75

    $83.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor.  The VFCA-75 Vented Flow Control module provides an option for use with installations where significant head pressure is present (greater than 6' [1.95 m]) or where applicable regulations require vented flow controls.  The Vented Flow Control helps reduce problems associated with high head pressure and helps slow the drainwater flow down the pipe, preventing it from exceeding 75 gallons per minute (4.73 l/s).  Includes appropriate PVC fitting and flow stainless steel flow control orifice.

    Learn More
  6. Vented Flow Control Assembly, 35 gpm

    Vented Flow Control Assembly, 35 gpm
    Part #: VFCA-35

    $54.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor.  The VFCA-35 Vented Flow Control module provides an option for use with installations where significant head pressure is present (greater than 6' [1.95 m]) or where applicable regulations require vented flow controls.  The Vented Flow Control helps reduce problems associated with high head pressure and helps slow the drainwater flow down the pipe, preventing it from exceeding 35 gallons per minute (2.21 l/s).  Includes appropriate PVC fitting and flow stainless steel flow control orifice.

    Learn More
  7. SSA-160 Support Stand for use with TZ-160

    SSA-160 Support Stand
    Part #: SSA-160

    $162.00

    QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. 

    Used to support the Trapzilla unit when installed directly on the floor of a basement or a mechanical room.

    Learn More
  8. ECA-TSS-29 Two-Piece Extension Collar - Fully Extended

    ECA-TSS-29
    Part #: ECA-TSS-29

    $627.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    Thermaco Trapzilla ECA-TSS-29 Two-Piece Extension Collar with telescoping design and ladder grooves, allowing for precise sizing in the field, offering an additional 29" (73.7 cm) of extension for Trapzilla Solids Separator Units installed in-ground.  ECA-TSS-29 is compatible with 18" (45.72 cm) Single-Piece Extension Collar found on In-Ground (-ECA) Models and Standard Adapter Ring found on Basic Models.  Installed with In-Ground (-ECA) Models, Trapzilla Solids Separator Unit has 47" (119.4 cm) of extension to bring lid to ground level.

    Learn More
  9. FTCA-22 Fabricated Top Cover

    FTCA-22 Fabricated Top Cover
    Part #: FTCA-22

    $488.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    The FTCA-22 Top Cover takes the place of the 22" Diameter Solid Top Cover and is compatible with the TZ-160, Standard Adapter Top Cover, all Trapzilla-ECA models with ECA-18, and ECA-TZ-29. It provides a durable, non-slip, diamond plate surface for installation in high traffic areas such as a kitchen floor.


    For a traffic rated solution, refer to our traffic rated drawings here.

    Learn More
  10. FTCA-36 Fabricated Top Cover

    FTCA-36 Fabricated Top Cover
    Part #: FTCA-36

    $650.00

    QUALIFIES FOR FREE SHIPPING VIA UPS GROUND IN CONTIGUOUS US ONLY

    The FTCA-36 Top Cover takes the place of the Standard Adapter Ring or Extension Collar Adapter Ring and 22" Diameter Solid Top Cover.  It provides a durable, non-slip, diamond plate surface for installation in high traffic areas such as a kitchen floor.  It contains a single 4” (10.1 cm) Brass Cleanout Plug that may removed for pumping while leaving the FTCA-36 in place. 


    For a traffic rated solution, refer to our traffic rated drawings here.

    Learn More