Severe winter weather in the Southeast is impacting normal delivery. We will work to ensure the safety of our employees while minimizing effects of our service to you.

X
TZ-600-ECA In-Ground Model

More Views

  • TZ-600-ECA In-Ground Model
  • Trapzilla Cutaway

TZ-600-ECA Trapzilla Grease Interceptor

Part #TZ-600-ECA

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The TZ-600-ECA In-Ground Trapilla Grease Interceptor is ASME rated for 75 GPM and holds more than 635 pounds (86 Gallons) of grease in a 95 Gallon footprint. Unlike traditional interceptor designs, the TZ-600-ECA is capable of holding more than 91% of its internal volume in grease and solids before it begins to lose efficiency. Perfect for replacing failing steel or concrete, the TZ-600-ECA is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The in-ground models come with an Extension Collar Adapter Ring lid, 18" long single-piece extension collar and 22" Solid Top Cover that can be removed easily to clean out retained grease.

$2,999.00

Details

ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 l/s)

Grease Retention Capacity: 635 Pounds (288 Kg)

Material: Rotationally Molded Polyethylene

Thermaco Trapzilla Model No. TZ-600-ECA, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) / 635.6 lbs. (288.3 Kg) of total grease storage capacity with flat separation efficiency curve capable of holding 91% of volume in free-floating fats, oils, and grease at capacity, with removable cover for grease and solids removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and heavier than water solids, a unitary tank body and 4” (101 mm) inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Includes one extension collar assembly, linear low-density rotationally molded polyethylene for field adjustability to optimal installation depth. 

Unit may also be listed as TZ600 or TZ600ECA