Trying to figure out how to fit a grease trap into your kitchen? Download our free guide on saving space in kitchen design.

X
W-750-AST with SFK-3 and DRUM-55

More Views

  • W-750-AST with SFK-3 and DRUM-55
  • W-750-AST with ILS-1

W-750-AST Automatic Grease Removal Device

Part #W-750-AST

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The Big Dipper W-750-AST Automatic Grease Removal Device is capable of accepting up to a 75 GPM (4.73 l/s) flow.  The center module which comes with digital time control, heater assembly, and mechanized skimming assemble, automatically isolates trapped grease into grease collector for easy disposal.  The Automatic Solids Transfer feature automatically empties incidental solids out of the solids chamber and down the sewer line.
  • Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with digital control interface and Grease Collector.
  • Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
  • Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
  • Compact footprint.
  • Two (2) No-Hub Connectors provided.
$8,231.00

Details

Materials: 

Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene

Electrical:  115 VAC, 60 Hz, 535 Watts (4.6 Amps)*

Maximum Inlet Flow Rate:  75 GPM (4.73 l/s)

Number of Skimming Wheels:  1

Skimming Rate:  20 Pounds Per Hour (9.08 Kg Per Hour)

Grease Retention Capacity:  150+ Pounds (68+ Kg)

Eductor Pump Operation Water Requirements: 50 PSI min., 12 GPM (3.45 BAR min., 0.75 l/s)

Thermaco Big Dipper Model No. W-750-AST, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 75 gallons per minute (4.73 l/s) peak flow, 150 pounds (68 Kg) of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, lift-out filter basket access, an eductor transfer pump controlled by repeat cycle timer, and a separate grease and oils collection container. Eductor pump shall be supplied with a 0.5” female connector for attachment to facility- supplied water supply. Eductor pump shall be supplied with an approved vacuum breaker. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection.

*Electrical Variations

W-750-AST: 115V 50/60Hz, 535 Watts (4.6 Amps)
W-750-AST-E: 230V 50/60Hz, 535 Watts (2.3 Amps)

Unit may be improperly listed as W750AST, W-750AST, W750-AST, W-750, W750, 750-AST or 750AST