W-1000-IS Automatic Grease Removal Device with Advanced Odor Protection
Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene
Electrical: 230 VAC, 50/60 Hz, 2346 Watts (10.2 Amps)*
Maximum Inlet Flow Rate: 100 GPM (6.3 l/s)
Number of Skimming Wheels: 2
Skimming Rate: 20 Pounds Per Hour (9.08 Kg Per Hour)
Grease Retention Capacity: 207.6 Pounds (94.2 Kg)
Internal Solids Strainer Capacity: 3.7 Gallons (14 L)
Thermaco Big Dipper Model No. W-1000-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated to ASME A112.14.3 and/or PDI-G 101 standards at 100 gallons per minute (6.3 liters per second) peak flow with 207.6 Pounds (94.2 Kg) of grease capacity and including as an integral part of the unit, 4” (100 mm) inlet/outlet, 2 rotating gear oleophilic/hydrophobic skimming wheel assembly for automatic grease/oil removal, flow control device, self-regulating electric immersion heater with thermostatic control, 1” (25mm) vessel vent, integral gas trap, digital control for programmable operation, field reversible motor assembly and grease/oil sump outlet, quick release stainless steel lid clamps, fully removable polymer lid with magnetic lid tensioners, internal polymer/stainless steel strainer basket for collection of coarse solids, polymer wiper blade unit and a separate gasketted removable grease and oils collection container with carry handle and pouring spout. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection. Two (2) no-hub connectors for plumbing connection provided.
W-1000-IS: 230V 50/60Hz, 2346 Watts (10.2 Amps)
W-1000-IS-E: 230V 50/60Hz, 2346 Watts (10.2 Amps)
Unit may also be listed as W1000IS, W-1000IS, W1000-IS, W-1000, W1000, 1000-IS or 1000IS
Choose the CAD format first and then click 'Download CAD' to get drawing.
If CAD/DWG tool is not loading properly, visit Big Dipper Specifications Page and click View CAD File next to model desired.